2010 Kawasaki Mule 4010 4x4 DIESEL

MSRP $10,999 - Call 1-800-556-3098 for our special discount pricing.

Economical and versatile, with healthy diesel torque and proven Mule toughness

With diesel engines powering most of the vehicles operating on job sites and farms, the Kawasaki Mule™ 4010 4x4 Diesel utility vehicle is a natural fit. This muscular workhorse is a proven performer with its reliable and robust diesel engine, full-size chassis and selectable four-wheel drive. Wrapped in rugged bodywork, the Mule 4010 4x4 Diesel makes the job easier with features like electric power steering (EPS), a fully-automatic transmission, locking rear differential and a tilting cargo bed.

Producing high torque at low engine rpm is the Mule 4010 4x4 Diesel’s liquid-cooled, 953cc three-cylinder diesel engine, which is matched to a Kawasaki Automatic Power-Drive System (KAPS). This is a continuously variable transmission (CVT) that features a high and low range, reverse, and helps maintain engine rpm in its most efficient range for any selected vehicle speed, load, or terrain. It yields a wide drive ratio spread for ample pulling power and quick acceleration.

Large torque converters maximize belt engagement area for optimal heat dissipation, strength and durability. Wear is reduced by the use of a thick, strong drive belt and sheaves with high silicon-type material. Durability is further aided by cooling the torque converter with filtered air via a special air cleaner that uses an easily replaceable filter element and an efficient intake cooling fan to draw sufficient air into the CVT. A high-flow cover also helps cool the CVT, while providing superb splash protection and water-proofing.

The reliable drive system uses a dependable, low-maintenance shaft drive to transmit power to a dual-mode rear differential that can be locked to maximize traction, or unlocked to minimize ground disturbance when making tight turns. The operator can also engage four-wheel drive for extra traction and pulling power in difficult conditions.

A cyclone-type Donaldson® air filter system with a replaceable paper element supplies the engine with clean air. This efficient design needs less frequent cleaning, even with repeated use in extremely dusty off-road conditions. Helping the filter stay clean and last longer—especially in the rugged conditions for which this Kawasaki was built—the engine air and converter cooling air are both drawn from the top of the cab frame, where there is less dust.

The electric power steering (EPS) system offers a more controlled ride by reducing steering effort at low speeds and harnessing its electric motor’s inertia to dampen much of the bump steer and kickback associated with front wheel impacts. Offering a significant boost at low speeds and in four-wheel drive, the EPS system uses input from vehicle speed and torque sensors to determine how much assistance is needed from the system’s electric motor.

The Mule 4010 4x4 Diesel’s straightforward user-friendly controls allow drivers to focus more attention on negotiating rough or fragile terrain. The forward/reverse, high/low-range gear lever and the four-wheel drive selector are all within easy reach on the dash. The coolant temperature warning light is easy to see, and a push-button control activates the headlights. Other standard features include an hour meter, a horn on the dash, a gauge on the fuel tank and an intake restriction gauge to indicate when the air filter needs to be cleaned or replaced.

The Mule 4010 4x4 Diesel features a roomy cab that’s surrounded by a large-diameter steel tube frame structure. With its modern rugged bodywork, this four-wheel drive utility vehicle is completely at home in tough work environments. Its durable, color-molded plastic body panels are manufactured help hide minor scuffs and scratches. The front hood can be opened with the pull of a dash-mounted knob and allows access to a deep storage space that’s equipped with convenient D-rings to help secure cargo.

Additionally, two levers make opening and closing the tailgate a secure and easy process. The Mule 4010 4x4 Diesel’s list of owner-friendly features also includes winch-ready tabs located under the front grille, which greatly simplifies the winch-mounting process.

The Mule 4010 4x4 Diesel chassis includes a ladder-type frame riding on a DeDion type rear leaf-spring suspension. It is designed to carry heavy loads yet provide a smooth ride when the cargo bed is empty. MacPherson struts handle front suspension duties and provide a good balance of comfort and load capacity. Effective stopping power is provided by four hydraulically operated, self-adjusting, sealed drum brakes that are designed to resist contamination from water, mud and other debris. Large 23-inch low-pressure tires provide a comfortable ride, great traction and help minimize impact over a variety of terrain.

Kawasaki Mule 4010 Diesel 4x4 Specifications

Engine Four-stroke, liquid-cooled, three-cylinder, overhead valve diesel

Displacement 953cc

Bore x stroke 72 x 78mm

Compression ratio 24.8:1

Air filter Snorkel-type with cyclone-type two-stage dry replaceable element

Oil filter Automotive-type spin-on canister

Ignition Compression with glow plugs for starting

Electrical 12V DC, 52 amp-hour battery, 40 amp alternator

Transmission Kawasaki Automatic Power-Drive System (KAPS), with reverse, dual range, 2WD/4WD

Final drive Shaft, selectable four-wheel drive with dual-mode rear differential

Exhaust Muffler with USFS-approved spark arrestor

Tires 23x11-10 tubeless

Front suspension / wheel travel Independent, MacPherson strut / 3.9 in.

Rear suspension / wheel travel Semi-independent, De Dion axle with leaf springs and shocks / 2.8 in.

Steering Electric power steering assisted rack-and-pinion

Brakes Four-wheel hydraulic drums, sealed

Fuel capacity 6.4 gal.

Curb weight 1,598 lbs.

Overall length 118.3 in.

Overall width 62.0 in.

Overall height 75.8 in.

Wheelbase 73.6 in.

Ground clearance 6.9 in.

Roll over protective structure (ROPS) This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement

Cargo bed dimensions (LxWxH) 46.3 x 51.6 x 11.3 in. / 15.6 cu. ft.

Load capacity 1,632 lbs.

Cargo bed capacity 1,100 lbs.

Towing capacity 1,200 lbs.

Turning radius 11.2 ft.

Top speed 25 mph, governed

Instruments Parking brake warning light, coolant temperature warning light, horn, 12V DC outlet, (2) 5/21-watt taillight/brake light, (2) 35-watt sealed-beam headlight, speedometer

Color choices Woodsman Green or Dark Royal Red

Good Times™ Protection Plan 12 or 24 months

Warranty 12 Months

Kawasaki Mule 4010 Diesel Utility Vehicle Warranty

The is eligible for Kawasaki's Good Times Protection Plan extended warranty. Call 1-800-556-3098 for the special discounted price or click here for more information on the Kawasaki Extended Warranty.

Your new Mule 4010 Utility Vehicle comes with Kawasaki's 12-month/unlimited mileage limited factory warranty. You can extend your coverage inexpensively with the Kawasaki Extended Warranty.

Kawasaki Extended Warranty Up to Two Years Additional Coverage

Let Kawasaki protect your new Mule 4010 for years to come with the exclusive Good Times Protection Plan Kawasaki Extended Warranty. This plan repairs or replaces most components free of charge if found defective in material or workmanship. Everything about the plan is easy: There's no deductible. It's honored at every authorized Kawasaki MULE dealer nationwide. Want to ensure that your Mule 4010 is worth top dollar when you're ready to upgrade? The Good Times Protection Plan is easily transferred to another owner with no fee. Call 1-800-556-3098 to buy additional coverage of 12 or 24 months at a special discounted price. Imagine, for just pennies a day, you can ride with no worry and no hassle.

Kawasaki Mule 4010 Diesel Parts and Accessories

The critics love the Kawasaki Mule because it's got far more available accessories than the competition. Customers love Beartooth Kawasaki because we offer all of the OEM accessories at a fraction of list price. Call 1-800-556-3098 to order your Kawasaki Mule accessory or check the Kawasaki Mule Accessory page for more information.