2010 Kawasaki Mule 4010 4x4

MSRP $9699.00 - Call 1-800-556-3098 for our special discount pricing.

Four-wheel drive, fuel-injected, powersteering: Reliable utility competence

When four-wheel-drive traction is a must for hauling cargo around farms, through fields or to remote job sites, the Kawasaki Mule™ 4010 4x4 is the off-road utility vehicle of choice. With its full-size chassis, selectable four-wheel drive and powerful, digital fuel injection (DFI®) equipped engine there is never a doubt it can get the job done. The Mule 4010 4x4 also features an electric power steering (EPS) system, a fully-automatic transmission, locking rear differential and a tilting cargo bed.

The Mule 4010 4x4’s liquid-cooled 617cc four-stroke V-twin is managed by a digital Electronic Control Unit (ECU) and features a DFI system that compensates for variations in atmospheric pressure, engine and air temperature. The result is smooth and consistent engine starting, crisp throttle response and precise fuel metering, which helps reduce fuel consumption. The ECU incorporates an automatic fast idle speed control that activates when the engine is cold, eliminating the need for a manual choke. Its electronics also regulate maximum engine speed, eliminating the need for a mechanical governor.

The powerful 617cc V-twin engine is mated to a continuously variable transmission (CVT) that features both high and low range plus reverse. Power is transmitted through a dependable, low-maintenance shaft drive system to a dual-mode rear differential that can be locked to maximize traction, or unlocked to improve handling and minimize ground disturbance when making tight turns. Mule 4010 drivers can also engage four-wheel drive for extra traction in difficult conditions.

The Mule 4010 4x4’s rack-and-pinion steering is boosted by an electric power steering (EPS) system, which can reduce turning effort by up to 30 percent, and offers a significant boost at low speeds in four-wheel drive. The EPS system automatically determines how much assistance is needed, using input from vehicle speed and torque sensors.

The forward/reverse, high/low-range and the four-wheel drive selectors are all within easy reach on the dash, so drivers can focus more attention on negotiating rough or delicate terrain. The coolant temperature warning light is easy to see, and a push-button control activates the headlights. Other standard features include an hour meter, a horn and an air restrictor gauge to indicate when the air filter needs to be cleaned or replaced. The fuse box and oil dipstick are equally convenient, located underneath the seat for quick access.

A roomy cab is surrounded by the Mule 4010 4x4’s large-diameter steel tube frame structure. With its modern rugged bodywork, the four-wheel drive utility is a natural in the tough pickup truck work environment. Its body panels are manufactured from a durable, color-molded plastic that helps hide minor scuffs and scratches. The front hood can be opened with the pull of a dash-mounted knob and allows access to a deep storage space that’s equipped with convenient D-rings to help secure cargo.

Additionally, two levers make opening and closing the tailgate a secure and easy process. The convenience factor on the Mule 4010 4x4 extends beyond easy-access latches or controls; it also features owner-friendly touches like the winch-ready tabs located under the front grille, which greatly-simplify the winch mounting process.

The Mule 4010 4x4 chassis includes a ladder-type frame riding on a DeDion type rear leaf-spring suspension, which is designed to carry heavy loads yet provide a smooth ride when the cargo bed is empty. MacPherson struts handle front suspension duties and provide a good balance of comfort and load capacity. Effective stopping power is provided by four hydraulically operated, self-adjusting, sealed drum brakes that are designed to resist contamination from water, mud and other debris. Large 23-inch low-pressure tires provide a comfortable ride, great traction and help minimize impact over a variety of terrain.

The Mule 4010 4x4 utility vehicle can carry 800 pounds in its steel cargo bed and is capable of towing up to 1,200 pounds with an optional draw bar. Other popular accessories include an enclosed cab, cab heater, snow plow, and soft or hard tops. These and many other Authentic Kawasaki Accessories are available through Kawasaki dealers.

Kawasaki Mule 4010 4x4 Specifications

Engine Four-stroke, liquid-cooled, overhead valve V-twin

Displacement 617cc

Bore x stroke 76 x 68mm

Compression ratio 10.3:1

Carburetor Digital Fuel Injection

Air filter Snorkel-type with cyclone-type two-stage dry replaceable element

Oil filter Automotive-type spin-on canister

Ignition Digital electronic

Electrical 12V DC, 18 amp-hour battery, alternator

Transmission Continuously variable transmission (CVT) with high and low range, forward, and reverse, 2WD/4WD

Final drive Shaft, selectable four-wheel drive with dual-model differential

Exhaust Muffler with USFS-approved spark arrestor

Tires 23x11-10 tubeless

Front suspension / wheel travel Independent, MacPherson strut / 3.9 in.

Rear suspension / wheel travel Semi-independent, De Dion axle with leaf springs and shocks / 2.8 in.

Steering Electric power assisted rack-and-pinion

Brakes Four-wheel hydraulic drums, sealed

Fuel capacity 6.2 gal.

Curb weight 1,406 lbs.

Overall length 118.3 in.

Overall height 75.8 in.

Overall width 62.0 in.

Wheelbase 73.6 in.

Ground clearance 6.9 in.

Roll over protective structure (ROPS) This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement

Cargo bed dimensions (LxWxH) 46.3 x 51.6 x 11.3 /15.6 cu. Ft.

Load capacity 1,330 lbs.

Cargo bed capacity 800 lbs.

Towing capacity 1,200 lbs.

Turning radius 11.2 ft.

Top speed 25 mph, governed

Lights (2) 30-watt sealed-beam headlights, (2) 5/21-watt taillight/stoplight

Instruments Parking brake warning light, coolant temperature warning light, horn, 12V DC outlet

Color choices Woodsman Green, Smoky Blue

Good Times™ Protection Plan 12 or 24 months

Warranty 12 Months

Kawasaki Mule 4010 4x4 Utility Vehicle Warranty

The is eligible for Kawasaki's Good Times Protection Plan extended warranty. Call 1-800-556-3098 for the special discounted price or click here for more information on the Kawasaki Extended Warranty.

Your new Mule 4010 Utility Vehicle comes with Kawasaki's 12-month/unlimited mileage limited factory warranty. You can extend your coverage inexpensively with the Kawasaki Extended Warranty.

Kawasaki Extended Warranty Up to Two Years Additional Coverage

Let Kawasaki protect your new Kawasaki Mule 4010 4x4 for years to come with the exclusive Good Times Protection Plan Kawasaki Extended Warranty. This plan repairs or replaces most components free of charge if found defective in material or workmanship. Everything about the plan is easy: There's no deductible. It's honored at every authorized Kawasaki MULE dealer nationwide. Want to ensure that your Mule 4010 is worth top dollar when you're ready to upgrade? The Good Times Protection Plan is easily transferred to another owner with no fee. Call 1-800-556-3098 to buy additional coverage of 12 or 24 months at a special discounted price. Imagine, for just pennies a day, you can ride with no worry and no hassle.

Kawasaki Mule 4010 4x4 Parts and Accessories

The critics love the Kawasaki Mule because it's got far more available accessories than the competition. Customers love Beartooth Kawasaki because we offer all of the OEM accessories at a fraction of list price. Call 1-800-556-3098 to order your Kawasaki Mule accessory or check the Kawasaki Mule Accessory page for more information.