2009 Kawasaki Mule 4010
Mule™ 4010 4x4: Upgraded with Digital Fuel Injection, Electric Power Steering and Bold New Styling
The pioneer in industrial-grade utility vehicles - MSRP $9499.00
Call 1-800-556-3098 for our special discount pricing.
When a four-wheel-drive vehicle is a must for hauling gear around farms, fields or to remote locations, the new Kawasaki Mule™ 4010 4x4 is the off-road utility vehicle of choice, thanks to its full-size chassis and a powerful engine now equipped with digital fuel injection (DFI). Besides the new DFI system, the Mule 4010 4x4 also features a new electric power steering (EPS) system, selectable four-wheel drive, a fully-automatic transmission, locking rear differential and a tilting cargo bed.
The new 2009 Mule 4010 4x4 is powered by a liquid-cooled 617cc four-stroke V-twin. Managed by a digital Electronic Control Unit (ECU), its new DFI system compensates for variations in atmospheric pressure, engine and air temperature. This helps make engine starting smoother and more consistent, gives better throttle response and its improved fuel metering helps reduce fuel consumption. The system incorporates an automatic fast idle speed control which activates when the engine is cold, eliminating the need for a manual choke. The system also regulates maximum engine speed, eliminating the need for a mechanical governor.
The powerful 617cc V-twin engine is mated to a continuously variable transmission (CVT) that features both high and low range plus reverse. Power is transmitted through a dependable, low-maintenance shaft drive system, to a dual-mode rear differential that can be locked to maximize traction, or unlocked to improve handling and minimize ground disturbance when making tight turns. Mule 4010 drivers can also engage four-wheel drive for extra traction in difficult conditions.
The low effort rack-and-pinion steering on the Mule 4010 4x4 is made even easier with a new electric power steering (EPS) system. EPS reduces turning effort by up to 30 percent, especially at low speeds in four-wheel drive, using input from vehicle speed and torque sensors to determine how much assistance is needed from the system’s electric motor. With the forward/reverse, high/low-range gear lever and the four-wheel drive selector within easy reach on the dash, drivers can focus more attention on negotiating rough or fragile terrain. The coolant temperature warning light is easy to see, and a push-button control activates the headlights. Other standard features include an hour meter, a horn and an air restrictor gauge to indicate when the air filter needs to be cleaned or replaced. The fuse box and oil dipstick are equally convenient, located underneath the seat for quick access.
Kawasaki Mule 4010 Specifications
Engine Four-stroke, liquid-cooled, overhead valve V-twin
* Note: Specifications and pricing are subject to change.
Bore x stroke 76 x 68mm
Compression ratio 10.3:1
Carburetor Digital Fuel Injection
Air filter Snorkel-type with cyclone-type two-stage dry replaceable element
Oil filter Automotive-type spin-on canister
Ignition Digital electronic
Electrical 12V DC, 18 amp-hour battery, alternator
Transmission Continuously variable transmission (CVT) with high and low range, forward, and reverse, 2WD/4WD
Final drive Shaft, selectable four-wheel drive with dual-model differential
Exhaust Muffler with USFS-approved spark arrestor
Tires 23x11-10 tubeless
Front suspension / wheel travel Independent, MacPherson strut / 3.9 in.
Rear suspension / wheel travel Semi-independent, De Dion axle with leaf springs and shocks / 2.8 in.
Steering Rack and pinion
Brakes Four-wheel hydraulic drums, sealed
Fuel capacity 6.2 gal.
Curb weight 1,406 lbs.
Overall length 118.3 in.
Overall height 75.8 in.
Overall width 62.0 in.
Wheelbase 73.6 in.
Ground clearance 6.9 in.
Roll over protective structure (ROPS) This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement
Cargo bed dimensions (LxWxH) 46.3 x 51.6 x 11.3 /15.6 cu. Ft.
Load capacity 1,330 lbs.
Cargo bed capacity 800 lbs.
Towing capacity 1,200 lbs.
Turning radius 11.2 ft.
Top speed 25 mpg, governed
Lights (2) 30-watt sealed-beam headlights, (2) 5/21-watt taillight/stoplight
Instruments Parking brake warning light, coolant temperature warning light, horn, 12V DC outlet, speedometer
Color choices Woodsman Green, Dark Royal Red
Good Times™ Protection Plan 12 or 24 months
Warranty 12 Months
Kawasaki Mule 4010 Utility Vehicle Warranty
The is eligible for Kawasaki's Good Times Protection Plan extended warranty. Call 1-800-556-3098 for the special discounted price or click here for more information on the Kawasaki Extended Warranty.
Your new Mule 4010 Utility Vehicle comes with Kawasaki's 12-month/unlimited mileage limited factory warranty. You can extend your coverage inexpensively with the Kawasaki Extended Warranty.
Kawasaki Extended Warranty Up to Two Years Additional Coverage
Let Kawasaki protect your new Mule 4010 for years to come with the exclusive Good Times Protection Plan Kawasaki Extended Warranty. This plan repairs or replaces most components free of charge if found defective in material or workmanship. Everything about the plan is easy: There's no deductible. It's honored at every authorized Kawasaki MULE dealer nationwide. Want to ensure that your Mule 4010 is worth top dollar when you're ready to upgrade? The Good Times Protection Plan is easily transferred to another owner with no fee. Call 1-800-556-3098 to buy additional coverage of 12 or 24 months at a special discounted price. Imagine, for just pennies a day, you can ride with no worry and no hassle.
Kawasaki Mule 4010 Parts and Accessories
The critics love the Kawasaki Mule because it's got far more available accessories than the competition. Customers love Beartooth Kawasaki because we offer all of the OEM accessories at a fraction of list price. Call 1-800-556-3098 to order your Kawasaki Mule accessory or check the Kawasaki Mule Accessory page for more information.